The home of the Suzuki GTs
Would you like to react to this message? Create an account in a few clicks or log in to continue.

START UP AFTER RE-BUILD

3 posters

Go down

START UP AFTER RE-BUILD Empty START UP AFTER RE-BUILD

Post  liddd Tue Dec 09, 2008 11:57 am

Just re-built motor still air in oil feed pipes,do any of you guys know if it will clear on running.If it requires bleeding what is the best way to do this ?
cheers Dave
liddd
liddd
Crankcase Injector
Crankcase Injector

Posts : 20
Join date : 2008-04-01
Age : 65
Location : Walsall,UK

Back to top Go down

START UP AFTER RE-BUILD Empty Re: START UP AFTER RE-BUILD

Post  Clivey Andrews Sat Dec 13, 2008 3:00 am

Yeah, you wanna be sure - can you force oil by using a syringe....?
Clivey Andrews
Clivey Andrews
Admin

Posts : 83
Join date : 2008-03-07

Back to top Go down

START UP AFTER RE-BUILD Empty START UP

Post  liddd Tue Dec 16, 2008 2:22 pm

Started ok Clivey loads of smoke,mixed some 2stroke in petrol tank just to be sure,oil feed pipes clearing ok with
running.Nothing like a good lung full of 2stroke eh bounce
liddd
liddd
Crankcase Injector
Crankcase Injector

Posts : 20
Join date : 2008-04-01
Age : 65
Location : Walsall,UK

Back to top Go down

START UP AFTER RE-BUILD Empty Re: START UP AFTER RE-BUILD

Post  roverman Sat Dec 20, 2008 10:30 am

The factory manual tells you to start the motor up and hold the oil pump lever in the fully open position until the oil lines clear of air. Sounds like you've sorted it.

roverman
Crankcase Injector
Crankcase Injector

Posts : 20
Join date : 2008-03-25
Age : 64
Location : Manchester, England

Back to top Go down

START UP AFTER RE-BUILD Empty Re: START UP AFTER RE-BUILD

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum