GEARBOX SPROCKET FITTING??
2 posters
Page 1 of 1
GEARBOX SPROCKET FITTING??
roverman Mon Apr 07, 2008 4:46 pm
Can anyone help me with some advice on fitting the gearbox sprocket?
The GT550 has the strange system of securing the gearbox end sprocket by threading on a retaining ring and then rotating it to trap the sprocket before tightening down the three small bolts. When I do this my sprocket still has play in it such that you can rock it about 2-3mm each way. This doesn't seem right to me. I have checked th parts book and all parts seem to be present, there are no spacing shims listed to take up this play. Any advice?
The GT550 has the strange system of securing the gearbox end sprocket by threading on a retaining ring and then rotating it to trap the sprocket before tightening down the three small bolts. When I do this my sprocket still has play in it such that you can rock it about 2-3mm each way. This doesn't seem right to me. I have checked th parts book and all parts seem to be present, there are no spacing shims listed to take up this play. Any advice?
roverman- Crankcase Injector
- Posts : 20
Join date : 2008-03-25
Age : 64
Location : Manchester, England
gearbox sprocket
doghouse75 Wed Apr 09, 2008 10:25 am
Hi Roverman, mine does the same thing, think they all do, i`ve had no problems with it...hope that helps...Derek
doghouse75- Crankcase Injector
- Posts : 16
Join date : 2008-03-19
Location : Oxford, England
Re: GEARBOX SPROCKET FITTING??
roverman Thu Apr 10, 2008 1:21 pm
Thanks Derek,
I've ordered an extra ring and washer just in case.
I've ordered an extra ring and washer just in case.
roverman- Crankcase Injector
- Posts : 20
Join date : 2008-03-25
Age : 64
Location : Manchester, England
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|